💧Find Water Well Drillers

Well Drilling in San Angelo, TX — Tom Green County

3 water well contractor profiles serving San Angelo and surrounding Tom Green County areas.

Directory profilesBusiness details vary by providerService area listed when available

Quote request

Request local well service quotes

Your request goes directly to local licensed contractors in your area.

Sort
3 of 3

Abel Water Systems

San Angelo, TX

Full system

$14K–$25K

Pump repair

From $450

Official site says Abel Water Systems is a San Angelo-based water well, pump, windmill, and drilling company serving San Angelo, West Texas, and South Texas since 1988.

Profile notes2026-05-12

Official site says Abel Water Systems is a San Angelo-based water well, pump, windmill, and drilling company serving San Angelo, West Texas, and South Texas since 1988.

Profile reviewed
View details →

Big Country Water Services

Colorado City, TX

Full system

$14K–$25K

Water testing

From $75

Official services page says Big Country Water Services is a turnkey drilling and water services company serving Colorado City, Snyder, Abilene, San Angelo, Sweetwater, Big Spring, Garden City, Sterling City, and Midland with drilling and rehab services.

Profile notes2026-05-12

Official services page says Big Country Water Services is a turnkey drilling and water services company serving Colorado City, Snyder, Abilene, San Angelo, Sweetwater, Big Spring, Garden City, Sterling City, and Midland with drilling and rehab services.

Profile reviewed
View details →

Woehl Drilling & Service

Mertzon, TX

Full system

$14K–$25K

Water testing

From $75

Official site says Woehl Drilling & Service is a family-owned water well company serving San Angelo and West Texas with water well drilling, pump service and repair, well testing, trenching, solar pump, and windmill-powered well services.

Profile notes2026-05-12

Official site says Woehl Drilling & Service is a family-owned water well company serving San Angelo and West Texas with water well drilling, pump service and repair, well testing, trenching, solar pump, and windmill-powered well services.

Profile reviewed
View details →

Cost guide

Typical 2026 well service costs in San Angelo and Tom Green County

Bands are typical contractor quotes; final price depends on depth, casing, pump, permits, and site access.

Full system

$14K–$25K

Pump repair

$850–$2.8K

Pump install

$3.5K–$6.5K

Water testing

$150–$400

Well rehab

$1.5K–$4K

Get an itemized quote that covers drilling, casing, pump, pressure tank, electrical, and startup before any rig mobilizes — a written scope is your best protection.

What buyers around San Angelo keep asking

What does a complete water well system in San Angelo usually cost once drilling and pump equipment are both included?

Ask each San Angelo contractor to spell out the all-in price—drilling, casing, pumps, pressure tanks, trenching, startup, and testing—before the rig shows up so you understand the real scope.

How deep are residential wells typically drilled around San Angelo, and what changes the final price?

Use each directory profile as a starting point, then ask the contractor what depth ranges, local geology, and extra rig hours could change the final price around San Angelo.

What water testing or filtration steps should buyers plan for after drilling in San Angelo?

Ask whether the contractor can explain common water issues near San Angelo, such as hardness, iron, sulfur, sediment, or bacteria, and whether pump, filtration, and testing coordination is included.

Can they show you their license number, bonding, and insurance before work starts?

Directory details are a starting point only. Ask the contractor for current license numbers, bonding, insurance certificates, and permit guidance, then verify requirements with the appropriate state or local agency.

What happens if they drill and don't find enough water?

Ask each contractor to explain dry-hole or low-yield policies in writing so you know what is billable before drilling starts.

Why homeowners in San Angelo hire water well drillers

Water well drilling demand in San Angelo often comes from rural homes, replacement wells, pump failures, and properties outside city water service. Buyers usually want clearer answers on total system cost, drilling depth, pump setup, and post-drilling water treatment before they hire anyone.

Local buyers in San Angelo benefit when drillers explain likely depth, site access, casing, pump sizing, and water quality testing in plain language before the project starts.

Contractor lookup disclaimer

Find Water Well Drillers is a directory lookup resource, not an endorsement or licensing authority. Always verify current licensing, insurance, permits, service area, and written scope directly with the contractor and the relevant state agency.

Free hiring checklist

Water Well Contractor Hiring Checklist

Use this before requesting bids in San Angelo, Texas. Twenty questions to ask each contractor — covering quote scope, licensing, pump and casing details, and dry-hole policy — so you can compare apples to apples.

Quote scope

  • Drilling labor only, or full system (drilling + casing + pump + pressure tank + wire + trenching + startup + testing)?
  • Per-foot drilling rate and what it includes / excludes
  • Site-prep, access, and mobilization fees broken out separately
  • Permits — who pulls them, who pays the fees
  • Written change-order policy if depth or scope expands mid-job

License and insurance

  • Current state water well drilling license number (verify with the state agency)
  • Certificate of insurance — general liability and workers' comp
  • Bonded? Bond amount and bond company
  • Years operating under the current business name
  • Local references with completed wells you can call

Pump, casing, and tank

  • Pump type recommended (submersible vs jet) and HP / GPM rating
  • Casing material (steel vs PVC), wall thickness, and grouting plan
  • Pressure tank size and brand; pressure switch settings
  • Wiring, conduit run, and electrical hookup — included or contractor responsibility
  • Startup, shock chlorination, and water sampling included or extra

Dry-hole and yield policy

  • What happens if the borehole is dry — full charge, partial, or none?
  • What yield (GPM) is the contractor targeting before stopping?
  • Hydrofracturing or re-drill options and pricing if yield is low
  • Warranty period on workmanship; what voids it
  • Annual inspection / maintenance plan availability and cost

Print this page or copy the checklist into your notes. There is no email gate. The directory is free and contractor profiles are listed so you can compare options before contacting a contractor.

Related pages for San Angelo buyers

Nearby city pages

More nearby city links will expand as coverage grows.